Neptune Systems | APEX Controllers | Other Solutions | Expansion Modules | Energy Bars | Accessories | Probes |
LED DIMMING AND PUMP CONTROL :: VDM
LED DIMMING HAS NEVER BEEN EASIER
Every day it seems there is yet another LED light fixture released. Each one with its own method for control and dimming. With this module, you can outfit your Apex System with the ability to control many different brands of LED lights…from those that use the common 0-10V interface to the more complex like those that use a serial port connection such as the Aqua Illuminations Sol and Acan Lighting fixtures.
PH/ORP PROBE MODULE :: PM1
4 IN 1 GOODNESS WITH THIS MODULE
The PM1 probe module is just what you need if you want to monitor pH or ORP in your tank. And, there is an added bonus, you get an extra temperature port as well as six I/O switch inputs for use on ATO, feed buttons, or whatever else you may come up with. This module is perfect for someone that wants to add an additional pH or ORP port to their Apex System.
SALINITY MODULE :: PM2
REAL-TIME MONITORING OF SALINITY IN YOUR AQUARIUM
Maintaining consistent salinity in your aquarium is key to the well being of every organism inside it. And, as busy as we sometimes are, we don’t even realize our parameters are out of whack until it’s too late. With this module, your Apex will be constantly monitoring the Salinity in your tank and will let you know the minute it is trending outside of the safety zone.
DISSOLVED OXYGEN MODULE :: PM3
REAL-TIME MONITORING OF DISSOLVED OXYGEN IS A GREAT SAFETY NET
Many marine aquarists only give the oxygen content in their aquarium water a passing thought, not fully understanding how the level of the Dissolved Oxygen (DO) in their tanks can affect their entire tank population. In one way or another, everything (fish, invertebrates, corals, algaes, bacteria) in the oceans and in marine aquariums react with oxygen.
ADVANCED LEAK DETECTION MODULE :: ALD
FINALLY, AN EASY WAY TO DETECT WATER ON THE FLOOR
The long-awaited ALD Module now gives your Apex the ability to detect water on the floor in up to four separate locations and tells your Apex to sound an alarm, email you, or whatever action you desire giving you the ultimate in peace of mind. This new module is Plug-and-Play, connecting to the Apex System’s AquaBus. It has four separate probe ports where you can plug in either the optionally available low-profile probe (perfect for under carpets) or the weighted, solid-surface probe. The ALD has four inputs for the ALD probes.
THE ULTIMATE MULTIPURPOSE FLUID-MONITORING DEVICE
The FMM (Fluid Monitoring Module) is a multi-purpose device that, with the help of various accessories, enables your Apex to do:
LUNAR SIMULATOR MODULE :: LSM
Moonlight in the ocean is believed to be as significant as the time spent in full daylight. Moonlight triggers various internal and external biological activities among the many thousands of reef organisms. Moonlight LEDs for your aquarium emulate that cycle and as a bonus help you to observe your tank in the nighttime hours without disturbing our startling your fish and other creatures.
It is called 1LINK because there is one power supply, one module (for up to three 1LINK devices), and a one-click-connection of a wire that carries not only the power for the device, but two-way communication from it to your Apex. Setup is simply click and go.
VORTECH/RADION WIRELESS EXPANSION MODULE :: WXM
EcoTech VorTech pumps are one of the most widely used, and loved, pieces of aquarium gear on the market today. As great as they are though, sometimes you just want to get a bit more control over them. With this module, your Apex will become the taskmaster telling your pumps exactly what to do based on time of day, feed mode, power outage mode, and just about any other thing you can can come up with.
The Apex Base Unit – It All Begins with the Brain
The Apex Base Unit is basically the brains of your entire Apex System. The Apex Base Unit (ABU) is far different than from what any other controller at this price level is offering. The ABU is basically a small computer whose only job is take care of your aquarium. It has a 32-bit microprocessor and a built-in web server. The web server makes it possible for your to configure and operate your Apex from any network-connected computer or mobile device – no software to install on a PC – it also means it’s Mac compatible!
The PMUP is a multi-purpose pump that can be used for many different tasks on your aquarium. The most popular uses will be for:
Many other salt or freshwater uses
When connected to the I/O Port of your Apex, Apex Lite, or PMx module, the Breakout Box gives you an easy way to connect up to six external switch inputs to your Apex. Examples of things you might connect in this manner include: