Company Info
Store Hours:   
11am - 6pm
Sunday - Saturday
Phone: 530-222-3474
 
Address:
2609 Bechelli Lane
Redding, California 96002
NorCal Corals Redding California Aquariums Equipment Supplies Coral Frags Fish Reefs Company Logo

WAV Starter Kit

$499.95Price

WAV™ :: EXTREME FLOW FOR YOUR AQUARIUM

 A POWERHEAD THAT ANSWERS ALL YOUR NEEDS

  • Extreme flow (~4000+ gph)

  • Compact size (less total mass compared to nearly all similar flow pumps)

  • Directional flow (pivots with 40 degree range of motion and can be rotated – great for rear wall use)

  • Safe, 24V DC operation

  • Low power consumption – Less than 35w at the wall

  • Multiple operational modes (random flow modes, mirror, inverse, etc.)

  • Easy to clean (pump automatically shuts off when removed from water)

  • Incredibly Quiet (possibly the quietest driver on the market)

  • Magnetic mount works on up to 1″ glass (in a class by itself)

  • Easy installation with just a single skinny wire for all power and control (1LINK interface makes it a snap!)

  • Competitively priced (In USA just $199.95 for one WAV, $499.95 for the WAV Starter Kit)

 

DIRECTIONAL FLOW ALLOWS STEALTH MOUNTING OPTIONS

Unfortunately, some of the leading water moving pumps on the market only send flow in a direction perpendicular to the glass. This really limits an aquarists options and, in some cases, obstructs the view. Having a powerhead that can be pointed in all directions is nothing new, but the hardware to make that happen usually takes up too much space and is unsightly. The WAV answers both of these problems with a new take on an articulating mount.

 

Through research we found that most customers usually never need to point their pump at extreme angles – usually 20 degrees one direction or another is enough. This is the approach we took with the WAV. With its innovative, low-profile magnetic mount, you get up 40 degree range of motion on the pivot and then the entire pump rotates 360 degrees. This provides so many more options than flow that coming straight out from the side or back of the aquarium. Imagine mounting the WAV on the back side glass or even the back wall, set an angle, and kicking the flow off the side or front glass. You get the flow where you need it and you stop blocking the beautiful side views of your aquarium!

 

ENDLESS FLOW OPTIONS FOR EVERY AQUARIST

We know that everyone likes their flow a little bit different.  So Apex Fusion controls the WAV with a multitude of patterned flow and random settings.  You can even set one or more pumps to mirror or be the inverse of another. The easy to use Apex Fusion scheduling graph makes it a snap to set up huge waves in the morning, stir up detritus in the afternoon, and slow the flow at night. The flow in your aquarium can be as unique as your favorite coral!

 

DETAILED, REAL-TIME PUMP STATUS AND AI

This is a first for this product segment. From within Apex Fusion, the details of operation of every WAV on your tank can be observed. You will be able to see the mode, the RPM, the temperature range, and the current status of the pump. Apex Fusion takes this one step further. It monitors your pump parameters, and then based on its AI it takes corrective action such as stopping the pump and sending alerts to you by text or email when the pump is malfunctioning.

 

SNAILS, FALLS, STALLS – NO WORRIES!

Snails and other obstructions are usually a powerhead’s worst enemy – tearing it to pieces. Sometimes just knocking a pump off the glass will not only kick up sand all over the tank, but it can also destroy the pump, or worse your favorite corals. Most pumps cannot even tell when they are out of water – cavitating furiously when doing a simple water change – or spinning themselves to ruin. The WAV has advanced sensors that dramatically reduce these events from occurring. Even taking the pump out of water for a cleaning does not require it to be powered down – it senses the condition and turns off!

 

A MULTITUDE OF MODES

The WAV pumps can be set up to create a nearly infinite combination of flow types, intensity, and interaction between pumps. And the best part – no programming is necessary! It is as easy as moving dots on a graph and selecting from a menu of flow options”

 

So after much study of the problem, our answer is 1LINK. It is called 1LINK because there is one power supply, one module (for up to three 1LINK devices), and a one-click-connection of a wire that carries not only the power for the device, but two-way communication from it to your Apex.  Setup is simply click and go.

 

Less wires, less configuration headaches, and best of all, less cost to you as a consumer!

 

 

SIZE MATTERS WHEN IT COMES TO PUMP WIRE

When it comes to any powerhead pump, the smaller the wire, the better – the easier it is to hide. This is true both inside as well as outside the aquarium. Some pumps put the wire and motor on the outside of the aquarium and claim that this has a better aesthetic – but there still is a wire.  Many other manufacturers’ cables have a much larger diameter, some nearly 3x the mass.

 

QUIET OPERATION

Some of today’s most popular water moving pumps are anything but quiet. In fact, the ramping and pulsing sounds can even resonate into solid floors and be heard in other rooms.  We have tested many pumps in our lab and the WAV has one of the quietest driver systems on the market today.

 

WHAT IS YOUR AQUARIUM’S FLO™ ?

The key to keeping a great aquarium is understanding what is going on inside, observing when things go well or badly, and then trying to understand the relationship between what you did, what you measured, and what happened. For years we have used things like Temperature, pH, ORP, Salinity, etc. to understand the best working parameters for our individual aquariums. We all know there is no magic formula but we need this data to make decisions. We even look at the data to compare to past months or to compare to a fellow aquarist.

 

A NEW MEASUREMENT STANDARD

This understanding is here with the WAV and Apex Fusion. Since the WAV constantly communicates with Apex Fusion, it knows exactly how much flow it is producing and logs a new measurement standard we simply call FLO. On top of this, all the WAVs in your aquarium are aggregated giving you an overall FLO for your aquarium. Now you use this number to compare to others that use the WAV in their aquarium or simply compare to your own history of FLO in your aquarium.

 

WAV Starter Kit

Includes Two (2) WAVs, 1LINK Module, 100W 24VDC Power Supply, 3′ Aquabus Cable

Requires

 

Individual WAV

Includes WAV Pump

Requires

  • 1LINK Module with open port 
  • Apex, Apex Lite, or Apex Jr.
SKU: NEP0197